Customer Reviews With Photos
I purchased the ANCTOR Full Size Bed Frame with 3 Drawers, Upholstered Platform Bed in Grey. I had no problems with the bed frame itself. I would recommend obtaining this bed frame if you like the style. I had to pay extra for shipping. The box it is packaged in is about 24"x58" and listed at 106 lbs. The box arrived damaged but there was no damage that could not be fixed. The only damage I discovered was the metal frame support eyelets were bent (see picture). This was simple for me to fix with a pair of pliers. All the fabric and wood pieces were not damaged. I am impressed with the packaging. PARTS: Packaging all the parts into a relatively small 24"x58" box was impressive. I found no defects in any of the parts, disregarding the damage occurred by shipping to the a few metal pieces. Some of the wire frames of the drawers were slightly bend. This could have been from the shipping damage I suppose. I bent the frames back into place. The nylon drawer bottoms are annoying for me. I do not see the point but I guess it is a nice option for some. I will line the bottom with cardboard from the shipping box. The fabric seems durable and there were no stitching problems. The fabric is not super soft, but I do not expect it to be that soft. It is the same color of gray I was expecting and what was advertised. The wood platform slats had no issues either. They are not finish quality, so they are slightly rough and I did not notice any knots. I did not get any splinters, nor did I experience discomfort installing the support slats. The electric charging box works as expected. The boards attached to the top of the head board had not defects. One piece had some glue on it. WARNING: if you remove glue from either of these two pieces, be extremely careful. One can damage the "sticker" that decorates these boards. INSTALLATION: Very easy. The manual is very IKEA like. It is mostly pictures and some important notes. The screws and parts were 100% labeled correctly. Orientation is clearly shown in the steps. I took inventory of all the parts. 100% correct. But, through out the process, I lost two washers. I suspect one of my cats had more fun than me. I am very experienced in cheap furniture assembly. I used my hand flex shaft screw driver (helps a lot and saves time) with a 4.0 and 5.0 hex instead of the supplied ones. I did not find the need to use a drill. I did assemble the drawers first, mainly to remove parts. DRAWER WHEELS: be gentle when snapping them into place. When I attempted to slide two sets of wheels forward, I broke the front snap piece. I am too strong I guess. It does NOT affect the structure, but was more frustrating. Do not tighten any screws down until all the screws are in their holes for the part one is assembling. This will assist aligning parts correctly. I had zero issues with alignment. I did this for steps 3 & 4 (Headboard) and steps 9,10,11 and 12 (Frame). I just hand tightened the screws in all the steps, and then once I was ready, I tightened all of the screws. Total time to assemble was about 2 hours, at a relaxed pace. Only one point I was confused in the instructions. Step 6 has an L Brace that screws ONLY into the side of the headboard, no the top board that has the electrical outlet. The non screwed side I guess is physical support only. I think there is one error in the instructions, Step 4. The lower horizontal metal support brace of the headboard shows that it is screwing into the lower metal vertical supports. The picture shows screw hole on the vertical supports, but the screw holes are on the opposite side. This is evident in the zoom in area. In fact, in Step 3, it has a specific note for orientation. Follow this note and all will be well, despite the possible incorrect depiction. SUMMARY: I like this frame. It was fairly cheap and shipped quick and easy to assemble. Much better than the expensive local stores. It does not shake a lot. The box spring and mattress shake more than the actual frame. I think this is good. It has side ledges so that the mattress will not slide off the frame easily. The drawers, while not attached to the frame, slide easily on my carpet. I have not seen any frames that have the drawers attached to the frame in this price range. The side drawers do attach physically. The foot drawer is a flush and friction fit. I used the box spring to raise the height. I think it looks ok against the headboard. If one is expecting to prevent animals from getting under the bed, this may not work well. If the headboard is flush with the wall, I think it will help prevent animals from getting under the bed. If it can not be flush, like my setup, then animals can get underneath the bed through the back of the headboard. Also, if the mattress or box spring does not fill the entire frame, animals could sneak into the bottom of the bed, through the area where the wood slats are. My solution, I attached cardboard to the back sides to prevent my cats from access under the bed. Not elegant, but no person will see it. Pillows might also work. Sadly, the width of this frame is a little wider than my full size box spring and mattress. The width is correctly advertised. I just did not think of measuring my mattress. But, with my queen sized comforter, I can not see the extra 2 inches.
Was very impressed with the quality of this bed. Was easy to put together. Seems very sturdy. Great for spare room and love the looks. It does “shed” so to speak. Pieces of the headboard show up on the pillow cases but I think that’s because it is new and likely for small fragments to loosen and shed. Would recommend. Very happy with this purchase especially for the price!
I'm in love with that frame. It is so exquisit and modest. THANK YOU
Instructions are super easy to follow. Bed looks so beautiful once is put together. Bottom sliding drawers slip right in quick but since i have floor that doesnt really help as they move too much but thats not a product problem just something to keep in mind if you have wooden floors like me. I ended up using my box spring which makes it slightly higher which is nice doesnt look off or anything. Over all very happy with my purchase. Quality is a 10/10 it doesnt feel cheap its nice and sturdy doesnt feel loose.
We moved our son out if his bunk twin bed cause it started breaking due to his weight. He's 19 and has Down Syndrome. He needed something easy to move to make his bed AND NOT too low to the ground. He loves the plug at the top of the bed for his night light. Plenty of room underneath for storage if we want too! He's happy, mom's happy!
I was looking for a bed frame for a mattress I was given. First of all, the price was great. Secondly, I wanted one I would be able to use without a box spring that was high enough to store things that I don't always need, since my closet space is lacking. This frame isn't only for one of those mattresses in a box. I have a very heavy Stearns and Foster extra firm mattress that is 16 inches thick. My frame arrived on time, in a fairly large box. I'm not going to sugar-coat this; it's pretty heavy. I live in an apartment on the 2nd floor, no elevator. I managed to carry it upstairs by myself, though. When it arrived, I happened to be outside when the delivery man was pulling up to my house. He warned me that it was heavy and I probably needed help to bring it in. I live alone, so not an option. As I unpacked the box, I took note that it was packaged extremely well. Everything was divided into the sections that went together and they were shrink wrapped and bound together with strapping. There were layers of styrofoam in between each section of parts. The directions were very clear and concise, and included were all of the screws and nuts and bolts needed, as well as the tools required. The assembly took me about half an hour. Once completed and my mattress in place, I was seriously impressed. It's super sturdy. No wobbling, creaking, shifting... Nothing. It literally has no movement or noises whatsoever. It absolutely was worth the money spent. I love it.
Fácil de ensamblar y muy buena calidad .
Love it very cute, exact as description. Recomiendo este producto!
Very easy to put together, but seems very cheaply made
This bed frame is sturdy and well-designed! The instructions are very clear,Assembly was easy, and all the parts fit perfectly.It provides excellent support with no squeaking or wobbling. Shipping was fast, and everything arrived in perfect condition.It looks great, is clean and simple and the color matches what I expected! I’m extremely happy with this purchase,great value for the price!recommended!
I was expecting this to be more teal- it is a very dark forest green instead. But it’s gorgeous and seems pretty sturdy. Easy to put together, would buy again!
Sturdy, easy to put together. Sits shorter than my kithe needs, but for the price, cant go wrong. Nice looking, would buy again.
It took me 1 hour and a half to build it but it was worth it. Definitely a great product and love the lights. Would be easy if you had another person with you to build it but you can do it yourself. Good budget too!
First things the bed frame is sturdy the instructions easy to read the only problem was there was some delivery issues but did end up coming before estimated delivery time some of the holes weren’t drilled properly but it still put together 1 knob was scratched oh well nothing some paint can’t fix over all good bed frame.
Great kid’s bed, perfect for my daughter’s upgrade from a twin size. Sturdy, easy to assemble and packaged well. We loved the Jenny Lind style bed but it was out of our budget. This bed frame is an excellent alternative. Very similar look with a much better price tag. Happy with our purchase!
