Customer Reviews With Photos
La amé fácil de ensamblar
We ordered two of these twin beds, and they were SO easy to assemble! My 14 year old daughter and I did both of them together, and they were full assembled in about an hour. We love them! They are perfect for our guest bedroom. Very sturdy, they make no creaking or squeaking sounds, and we put an 11" hybrid mattress on each bed frame, and it fits perfectly.
Una linda cama trae luces led me encantó mucho la recomiendo!!!
Easy to assemble, sturdy & fits twin mattress perfectly. Needs tweeking a bit. In extremely small room walking around the frame is a little difficult due to stumped toes on legs that are not recessed under frame. Had to buy separately the supports for keeping the mattress from slipping - about $12 for 6. I would suggest some sort of leg pads for the part that touches the floor. The whole bed scoots around if hit/pushed slightly. Otherwise this is a great product I highly recommend.
Good bed frame for pice. We bought it for my 6 year old daughter’s room. My husband said assembly is a went well. There were a lot of pieces to put together so it took a while. The bed sits at a good height, supports the mattress well, but the mattress does slide some because it’s metal. We would buy this again.
This bed is a great pick up! We love it!! It was very easy to put together but you really do need to follow the instructions. There were people complaining about the baskets tilting but if you position the wheels correctly they will sit perfectly. See my picture of the wheels on the basket for reference. The headboard is very nicely done and the material doesn’t feel or look cheap at all, however the wire for the LED light seemed to be cut at the bend point. It looks like it was done purposely to allow more movement but I didn’t like that the inner wires were a little exposed so I taped it up with some electrical tape. No biggie. The padding on the headboard is nice too. Just enough for what’s needed lol 😂 The bed itself has a very sturdy construction. The wooden slats are over metal bars and they make no noise and hold support really well. The drawers lock in place very easily and sit cleanly within the profile of the bed. It’s a little lower than I thought but I have a taller mattress coming so that may make up the difference. And while I could definitely have put this together myself, I recommend two people. It will be so much easier. All in all a solid buy that we are very happy with!!!
Let me start with a delivery. Delivery was amazing. delivery Estimate was around December 17 to December 22 and then arrive a week earlier. Now let me start with the instructions. They were very clear and very easy to follow. All the items were labeled so you know which one was which so that was easy Peezy. to assemble. Now the sturdy part NOT GOOD AT ALL after assembly the bed was still wiggly so my husband came with a solution he built underneath the bed a triangle shape with some boards screws together and he also screwed the boards to the bed the boards were only attached with Velcro and he bolt the boards to the middle frame of the bed. After that, the bed became very sturdy just like a high dollar bed frame. I would have given a 5 star it wasn’t for wiggly part and we have to come with a solutions
Very impressed! Great quality and so easy to set up. I would purchase again!
I was hesitant due to the limited number of reviews. I just finished putting this together. It looks fantastic and is built to last. 100% real wood. Better than I expected for the price. The hardware quality is top Notch. This is a serious piece of furniture that I’m Sure will last for decades.
Good bed frame! Good pice! Got a queen don’t need box spring unless you wanted it high like you see in the pictures. 10/10 so far
The bed frame sits very low to the floor & the headboard isn’t lighting up.
I brought three of them for my kids and they them. They haven't put anything on them yet but I got paint brushes already!! 😃😃😃
As you see, I got 2 twin beds. They are for my 5 and 6 year olds. The 1st bed probably took me less than an hour to assemble. The 2nd bed maybe 30 minutes or less. If you don't have a rubber hammer/mallet, get one, this will be your best friend. And a drill bit that is smaller than the nails width to prevent wood from splitting. The wood itself is stainable. I used the bottom of the beds feet to test the color of stain. Then sealed it with 2 coats of polyurethane. (A little tip, stain the color you want before assembling.) If you want to get fancy, buy some Resin and fill all the cracks that are in the wood. I didn't do that because I kinda like the crack/separations. I used plywood as their bedboard, and screwed it into the frame. If there was any wobble in it before, there definitely isn't now. Then I applied a thick memory foam. The foot of the bed is still above the mattresses, just the way I wanted... if that's not how you want it, I am sure a boxspring and normal size mattress be higher than the foot of the bed. The diamond pattern on the foot and head was probably about the most difficult part. If they would have con-caved those end pieces a little so they sat in place as we are screwing them in, we would have had an easier time and it could have looked nicer... a messed up a couple times because I didn't line them up right. Overall, with a little tweaks here and there, I think this can be a good long term bed that could possibly last a few generations.
Holes in F1 were drilled into the opposite side and wouldn’t line up. Needs to be flipped in order to line up but ridge would then be on wrong side. Instructions are not very helpful.
Sturdy, stylish, and super useful! The lift-up storage feature is a game changer — perfect for small spaces. It took a bit of time to assemble, but the instructions were clear. Feels solid and looks great in the room!
