Wooden Twin Bed Frame with Charging Station and Easy Assembly

what our customer say this product:

Powered by

1. Savannah Verified Buyer – 8 August 2024

   Would be great if it wasn’t so flimsy. Cheap materials and can’t hold the weight of an 11 year old without breaking.
   

2. Sharon K Verified Buyer – 11 August 2024

   Quality wood. I did take my husband a while to put the frame together. We removed the box spring because the bed was too high with the bed frame. The height matches the other bed. Quality product and a cheap price.

   

3. Colleen Henderson Verified Buyer – 28 December 2024

   I spent a couple hours getting these set up and the rooms cleared out, just to sit on it for the first time and it broke. Stapled and glued in. So pissed and tired!!!! Don’t buy at all! It doesn’t even deserve one star but I have to.

   

4. Zoila Verified Buyer – 6 January 2025

   En serio, no les recomiendo comprar este producto. Llego ayer, la ensamblamos, y, a la hora que mi hija se acostó se partieron las tablas. La madera es muy delicada, simplemente no sirve. Totalmente decepcionada. Por ende, no recomiendo a nadie comprarlo. Ahora, no puedo devolverlo porque bote las cajas. Estoy muy enfadada, me quedé sin cama y sin el dinero. He intentado arreglarla, pero se desatornilla por todos lados. Para ser mas convincente, enviaré fotos. Además, en el grupo de tornillos, donde se tenía que poner los más largos, estos llegaron imperfectos.

   

5. john colella Verified Buyer – 1 February 2025

   Went together pretty easily a few predrilled holes were not quite the right size but using the provided screwdriver you can pry it down for the bolts to work. The bed frame looks nice, simple wood and the charging port looks nice, have not used it yet.

   HOWEVER, there is no way on God’s green earth that this thing can support 500lbs. I weigh 210 I sat down and had to pop up because I heard it start to crack! My girlfriend weighs 120 and same thing on the other side! I put some thin 1/8 in plywood over the slats and it will support me now but I was lucky I had it from my daughters old bed. So build quality is sub par at best.

   Will update if it doesn’t last.
   Update. It didn’t last 1 day
   

6. Edward Verified Buyer – 25 February 2025

   The middle was very flimsy due to the thin slates. and there was no lengthwise center support. I measured and cut a center slate, Screwed it in place to support the middle length and added a center leg. Then I re-stained it all and glued all the factory seams for safety. It now can support around 260lbs. Before i worked on it it may have been safe for 50lbs.
   

7. Phoenix Verified Buyer – 3 March 2025

   Sat on bed gently after making it. Only a mattress, a sheet, a blanket, comforter and myself. Not even a pillow. I did t even lay down. I sat at the s Centermost (incorrectly assumed strongest) part of the bed. Whole thing collapsed. As I looked closer. The embedded nuts glued into the frame also came out. The slat supports were installed using wood glue and 3 staples. Everything else was either solid wood or.screws I installed per manufacturer directions.

   

8. Amanda P Heinle Verified Buyer – 7 April 2025

   Aweful. The inner beam seems to be only held together by staples. As soon as my son laid down the inner frame came apart while the main frame that gets assembled was intact.