Max & Lily Twin Over Twin Solid Wood Bunk Bed Frame with Ladder White

what our customer say this product:

Powered by

1. Anonymous Verified Buyer – 25 April 2024

   This is a great, conservatively styled piece of furniture. Well made/sturdy with good wood material, no funny smells on the natural finish. Looks great assembled and enjoyable by the kids
   

2. Mire Verified Buyer – 12 May 2024

   Very nice bed, good quality, I had a great experience with the seller: delivery was fast, seller was very responsive to my inquiries, very helpful overall. The seller will send you the upgraded version on the bed, the one with more slats.
   

3. Donna-Lynn Campbell Verified Buyer – 11 June 2024

   It arrived quickly, easy to assemble, sturdy, nice product
   

4. Omar Verified Buyer – 25 June 2024

   The bed frame actually surpassed my expectations. First, I got the bed delivered way faster than the expected date. Second, the frame wasn’t that hard to install (no parts were missing and the instructions were clear). Third, I really like the circular stickers they supply to hide the bolts.

   My kids are loving their new bunk bed.
   

5. Nettie M. Verified Buyer – 8 December 2024

   Very good quality!

   

6. Liz G Verified Buyer – 5 February 2025

   A friend and I assembled the Max and Lily double bunk and two triple bunks, all of which are identical in their part numbers and assembly process. The double bunk was top quality and easy to assemble, but the triples, although clearly the same in their parts and assembly, were not nearly the same quality, so beware the newer version of the double bunk may not be as high quality as the one I received. The directions are easy to follow if you pay close attention to detail. However, we assembled them in a different order so that we weren’t trying to lift a completed bed into the air while fitting the legs onto the metal rods that connect it to the lower bunk. Instead, we assembled the top bunk in its place, on top of the lower bunk. We started by assembling all of the headboards/footboards. Each bunk is slightly different, so be sure to keep the pairs together. Then we connected the bottom bunk head and foot boards with the 2 long boards that hold the slats. We pushed the bolts in all the way to help hold up the long boards, then pulled the bolts out one at a time to screw them into the nut, using an impact driver. We fully tightened every bolt at each step. We stopped there, skipped some pages, and inserted the 5″ metal rods into the tops of the legs, and put the top bunk’s head and foot boards on those metal rods, on top of the bottom bunk. Then we attached both back guard rails at the same time by first hammering the dowels into the head/footboards with a rubber mallet and then guiding the holes in the ends of the boards onto the dowels sticking out. Then we attached the boards that hold up the slats, again pushing in all of the bolts to help hold it in place while we removed one at a time to screw the bolt into the nut. Then we attached the steel bar on the top bunk. Then the slats. Then the front guard rails. And finally the ladder. The double bunk took us 3.5 hours because we took our time to fully understand the directions and to sort all of the nuts and bolts into different bowls. I highly recommend using an impact driver–you can see in the pictures how tight we got the bolts. The beds are sturdy and beautiful. I bought 6′ foam pipe covers and cut them in half lengthwise and duct taped them to the underside of the steel bar to keep the children from bumping their heads. I paid more for the Max and Lily bunk mattresses and glad I did–they are high quality and a perfect fit. Can’t wait for my grandkids to come visit!

   

7. J McAfee Verified Buyer – 24 March 2025

   My review addresses the quality of construction, and how to remedy the flaws. I would not install this in a rental property; get a metal frame bunk bed instead. OK at home or a vacation home. This is made from New Zealand pine. A good solid wood with few cosmetic flaws. The wood is brittle, which contributes to the structural failures described by reviewers. Very nice finish but with some odor that takes a few weeks to dissipate. It is NOT toxic, as claimed by some reviewers. I purchased the full over full, with twin trundle. First, the assembly takes a good amount of time, 6-8 hours minimum to do a good job, without the modifications described below. Second, the assembled bunks were very solid without any play (unlike other reviewers). You MUST fully and firmly screw in the hardware to achieve the rigidity. The head of the hex head screws sits below the level of wood. Some fasteners required quite a bit of torque to fully engage, ultimately twisting the metal of the supplied hex-wrench. Be meticulous, but be sure to not over-tighten. The trundle construction quality is crap. Far weaker construction with inferior doweled joints in comparison to the bunk. Now about the flaws. Reviewers describe 2 major failure points: 1. Fracture of the slats under the mattress. 2. Fracture of the longitudinal frame rail across the lower bunk. Here is how I addressed these failure points: 1. I added 6 1×4 tight knot pine slats between the supplied slats. Add these before screwing down the supplied slats. I think 1×3 would be fine or preferable, but my lumber yard doesn’t stock this dimension. I stapled the slats to the strap interconnecting the supplied straps, but did not screw them to the side rails to allow a bit of flexion. This looks and feels REALLY solid. 2. I added to the longitudinal front side frame rail a zinc plated steel flat plate 1″ wide, 1/8″ thick, 72″ long purchased at Lowes. I didn’t add this to the back side rail since the weight causing the failure will be on the front side. Be sure to leave a gap between the slats and the frame rail to accommodate insertion of the flat plate. Attach to the side rails with 12 round head wood screws, #10, 3/4″ long. Drill 7/32″ holes in the steel flat plate, 1/8 ” in the wood rail. Prior to attaching the flat plate, the side rail had a subtle but real deflection with my weight; I can understand why this would fail. After attachment of the flat plate, I could detect zero deflection, solid as a rock. 3. The trundle is hopeless. I glued the dowels and added slats to the mattress support. If it lasts a year I’ll be thrilled.

   

8. nat Santana Verified Buyer – 28 March 2025

   La compre en 2022 para mis niñas y aún está intacta soporta un peso maximo de 400 libras y no es tan difícil de armar lo hicimos mi esposo y yo y no fue fácil de hacer, es de muy buena calidad la recomiendo.

   

9. Louis-Carol Lévesque Verified Buyer – 14 April 2025

   Produit de bonne qualité, le bois est solide et avec une belle finition. Le montage est facile, finalisé en moins de deux heures seul. Seul petit bémol, le bois est solide mais s’endommage quand même facilement. Avec des enfants, les surfaces ne resteront pas lisse longtemps . Mais, malgré tout, de façon structurellement, il reste solide.